Forse non tutti sanno che...
2 partecipanti
Pagina 1 di 1
Forse non tutti sanno che...
...molti (tutti ?) alimentatori switching possono funzionare anche con corrente continua !
Al meeting marchigiano alcuni partecipanti discutevano del problema di alcuni amplificatori integrati (ICEpower, ad esempio) a cui non si può applicare l'alimentazione lineare.
Ebbene, in realtà sembrerebbe possibile mettere un'alimentatole lineare - di adeguate caratteristiche, ovviamente - a monte dell'SMPS.
Certo non è detto che questo influisca poi sulla qualità del suono, ma qualcuno ha mai fatto prove in al senso ?
Per gli scettici, da questo sito:
Al meeting marchigiano alcuni partecipanti discutevano del problema di alcuni amplificatori integrati (ICEpower, ad esempio) a cui non si può applicare l'alimentazione lineare.
Ebbene, in realtà sembrerebbe possibile mettere un'alimentatole lineare - di adeguate caratteristiche, ovviamente - a monte dell'SMPS.
Certo non è detto che questo influisca poi sulla qualità del suono, ma qualcuno ha mai fatto prove in al senso ?
Per gli scettici, da questo sito:
How an SMPS works
Input rectifier stage
If the SMPS has an AC input, then its first job is to convert the input to DC. This is called rectification. The rectifier circuit can be configured as a voltage doubler by the addition of a switch operated either manually or automatically (this is a feature of larger supplies to permit operation from (nominally 120 volt or 240 volt supplies). The rectifier produces an unregulated DC voltage which is then sent to a large filter capacitor. The current drawn from the mains supply by this rectifier circuit occurs in short pulses around the AC voltage peaks. These pulses have significant high frequency energy which reduces the power factor. Special control techniques can be employed by the following SMPS to force the average input current to follow the sinusoidal shape of the AC input voltage thus the designer should try correcting the power factor. A SMPS with a DC input does not require this stage. A SMPS designed for AC input can often be run from a DC supply, as the DC passes through the rectifier stage unchanged. (The user should check the manual before trying this, though most supplies are quite capable of such operation even though no clue is provided in the manual!)
Re: Forse non tutti sanno che...
Marco Ravich ha scritto:...molti (tutti ?) alimentatori switching possono funzionare anche con corrente continua !
Al meeting marchigiano alcuni partecipanti discutevano del problema di alcuni amplificatori integrati (ICEpower, ad esempio) a cui non si può applicare l'alimentazione lineare.
Ebbene, in realtà sembrerebbe possibile mettere un'alimentatole lineare - di adeguate caratteristiche, ovviamente - a monte dell'SMPS.
Certo non è detto che questo influisca poi sulla qualità del suono, ma qualcuno ha mai fatto prove in al senso ?
Per gli scettici, da questo sito:How an SMPS works
Input rectifier stage
If the SMPS has an AC input, then its first job is to convert the input to DC. This is called rectification. The rectifier circuit can be configured as a voltage doubler by the addition of a switch operated either manually or automatically (this is a feature of larger supplies to permit operation from (nominally 120 volt or 240 volt supplies). The rectifier produces an unregulated DC voltage which is then sent to a large filter capacitor. The current drawn from the mains supply by this rectifier circuit occurs in short pulses around the AC voltage peaks. These pulses have significant high frequency energy which reduces the power factor. Special control techniques can be employed by the following SMPS to force the average input current to follow the sinusoidal shape of the AC input voltage thus the designer should try correcting the power factor. A SMPS with a DC input does not require this stage. A SMPS designed for AC input can often be run from a DC supply, as the DC passes through the rectifier stage unchanged. (The user should check the manual before trying this, though most supplies are quite capable of such operation even though no clue is provided in the manual!)
Il dubbio è proprio quello se serva o meno a livello sonico....
Per gli icepower poi il loro bello, a livello di costi, è che hanno tutto integrato
Stentor- Membro classe diamante
- Data d'iscrizione : 12.07.10
Numero di messaggi : 20392
Località : .
Impianto : .
Argomenti simili
» forse non tutti sanno che...
» Forse non tutti sanno che...
» per la serie "i bianchi non sanno fare il blues"...Johnny Winter
» Aiuto secondari toroidale - come riconoscerli?
» Allora questi ci sanno proprio fare
» Forse non tutti sanno che...
» per la serie "i bianchi non sanno fare il blues"...Johnny Winter
» Aiuto secondari toroidale - come riconoscerli?
» Allora questi ci sanno proprio fare
Pagina 1 di 1
Permessi in questa sezione del forum:
Non puoi rispondere agli argomenti in questo forum.
|
|
Oggi alle 0:05 Da FilippoTN
» Le dimensioni contano? Parlo di condensatori
Ieri alle 23:39 Da Alessandro Gurato
» MINI AMPLIFICATORE CLASSE D - CHE PASSIONE !!!
Ieri alle 21:25 Da embty2002
» Casse passive
Ieri alle 15:55 Da arthur dent
» Kenwood KA8100: 45 anni e sentirli tutti
Ieri alle 15:47 Da arthur dent
» compatibilità DIN-RCA
Ieri alle 11:42 Da GAMBACORTA STEFANO
» Casse passive
Ieri alle 9:17 Da CarloFar
» Squeezebox su Daphile ottiene nomi di tracce errati
Sab 27 Apr 2024 - 23:25 Da arthur dent
» Consiglio su Topping E30II vs Ifi Zen DAC V2
Sab 27 Apr 2024 - 20:19 Da ivan39
» Thorens TD 160B mkII
Sab 27 Apr 2024 - 11:02 Da Quaiozi!
» problema amplificatore kenwood ka-56
Ven 26 Apr 2024 - 13:25 Da salvo93
» Thorens TD126 MKIII
Ven 26 Apr 2024 - 10:01 Da philball1959
» cambio Stilo o Testina
Ven 26 Apr 2024 - 9:58 Da philball1959
» Fruscio ed effetto popcorn Piastra Teac A-103
Gio 25 Apr 2024 - 23:22 Da Alessandro Gurato
» Cerca l'officina riparazioni MI-BG. Ho bisogno di aiuto
Gio 25 Apr 2024 - 9:40 Da Alessandro Gurato
» Sostanza appiccicosa/gommosa x altoparlanti
Mer 24 Apr 2024 - 18:44 Da THC
» RME Digiface
Mer 24 Apr 2024 - 13:06 Da fritznet
» Sto imapzzendo per trovare un cavo dall'amplificatore alle casse.
Mar 23 Apr 2024 - 17:31 Da gmasi1971
» [TP + Spedizione] Vendo Wharfedale Denton 85th Black Edition
Mar 23 Apr 2024 - 7:52 Da Sanfilippo Roberto
» Stand diffusori homemade
Lun 22 Apr 2024 - 22:12 Da PiLuxNiEn
» KEF R3 META
Lun 22 Apr 2024 - 10:19 Da giucam61
» Volume che scompare
Dom 21 Apr 2024 - 11:39 Da Alessandro Gurato
» TRIANGLE THETA SIGNATURE
Dom 21 Apr 2024 - 6:36 Da AndreaCD
» Consiglio per Diffusori JBL
Dom 21 Apr 2024 - 1:45 Da TRIPLALLOSCADERE
» Consigli: acquisto giradischi Pioneer.....cinghia o trazione diretta? Modello?
Sab 20 Apr 2024 - 19:41 Da TRIPLALLOSCADERE
» Vendo Thorens td 115
Sab 20 Apr 2024 - 13:31 Da Alessandro Gurato
» Sommatore passivo
Sab 20 Apr 2024 - 8:54 Da RUR
» Elenco casse a 3 vie con woofer da 30cm in sospensione pneumatica
Gio 18 Apr 2024 - 15:17 Da Marco Ravich
» Samar PMT/1 prova messa a terra
Gio 18 Apr 2024 - 11:35 Da Gedeone
» Che dischi avete amato, ma non ascoltate più?
Mer 17 Apr 2024 - 23:53 Da Quaiozi!